CCP153 | Studio 5000™ Logix Level 2

Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. This course adds to your skill set by introducing new tasks such as connecting to a network, interpreting project execution, editing ladder logic online, and more.

Details

CCP151 | Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming

After completing this course, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification.

Details
Network

CCP183 | EtherNet/IP Configuration and Troubleshooting

Due to COVID-19 limitations this course may be subject to cancellation. Throughout this course, you will have the opportunity to practice the skills you have learned through a variety of hands-on exercises using an ABT-TDENET5700 EtherNet/IP workstation and Stratix 8000 switch. Exercises focus on the skills introduced in each lesson. Technicians and engineers who must deploy and maintain Industrial Automation and Control System (IACS) networks should attend this course.

Details
Remote Connectivity

CCA183 | Drives PowerFlex 750

Due to COVID-19 guidelines, please reach out directly to Sheamus Campbell at sheamus.campbell@eeco-net.com to schedule training(s). This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex® 750-Series (PowerFlex 753 or 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and properly wire the drive. You will also learn to diagnose specific faults.

Details
Remote Connectivity

CCA185 | Drives PowerFlex 525

Upon completion of this course, given a wired PowerFlex® 525 drive and AC motor, you will be able to properly start up the drive and configure drive parameters to meet application-specific needs. Throughout the course, you will have the chance to use a variety of hardware and software tools, including:The PowerFlex 525 keypad, and the Connected Components Workbench™ software. After each demonstration, you will be given exercises that offer hands-on practice using a PowerFlex 525 drive.

Details

CCP151 | Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming

After completing this course, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.

Details

CCN130 | Motion Control Fundamentals

Upon completion of this course, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems.

This course is designed to provide you with an understanding of the concepts, terminology, functionality and applications of motion control. In addition, you will also learn how motion control applications function using the concepts and principles discussed in each lesson.

Details
Remote Connectivity

CCA182 | Drives PowerFlex 750

Due to COVID-19 limitations this course may be subject to cancellation. Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to meet application needs. This course is intended for individuals who need to configure and start up PowerFlex 750-Series drives.

Details

CCP300 | Logix5000 Maintainer

Due to COVID-19 limitations this course may be subject to cancellation. This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, troubleshooting skills, and interpretation of ladder logic in a Studio 5000 Logix Designer® project. This course prepares you for the Logix5000 Maintainer Certificate Course Level 1 certificate exam, which is included in the course price.

Details
Remote Connectivity

CCA183 | Drives PowerFlex 750

Due to COVID-19 limitations this course may be subject to cancellation. This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex® 750-Series (PowerFlex 753 or 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and properly wire the drive. You will also learn to diagnose specific faults.

Details
Remote Connectivity

CCA182 | Drives PowerFlex 750

Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to meet application needs. This course is intended for individuals who need to configure and start up PowerFlex 750-Series drives.

Details

SAF-SFT10618 | NFPA 70E — 2018 Electrical Safety and Arc Flash

Due to COVID-19 limitations this course may be subject to cancellation. The purpose of this course is to provide the student with an overall understanding of the current requirements of NFPA 70E. A complete review of the standard will be provided, along with a review of the tables used to determine the Limited and Restricted Approach Boundaries and tables and calculation methods used to determine the Arc Flash Boundary and for determining proper personal protective equipment (PPE).

Details

CCP250 | Accelerated Logix5000 Programmer Level 1

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment. This course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam, which is included in the course price.

Details

SAF-SFT10618 | NFPA 70E — 2018 Electrical Safety and Arc Flash

The purpose of this course is to provide the student with an overall understanding of the current requirements of NFPA 70E. A complete review of the standard will be provided, along with a review of the tables used to determine the Limited and Restricted Approach Boundaries and tables and calculation methods used to determine the Arc Flash Boundary and for determining proper personal protective equipment (PPE).

Details

CCP299 | Studio 5000 Logix Designer Level 1

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. This course is intended for individuals who need to maintain and troubleshoot a ControlLogix system – but have no current working experience with ControlLogix systems.

Details

SAF-SFT10618 | NFPA 70E — 2018 Electrical Safety and Arc Flash

Due to COVID-19 limitations this course may be subject to cancellation. The purpose of this course is to provide the student with an overall understanding of the current requirements of NFPA 70E. A complete review of the standard will be provided, along with a review of the tables used to determine the Limited and Restricted Approach Boundaries and tables and calculation methods used to determine the Arc Flash Boundary and for determining proper personal protective equipment (PPE).

Details
Rockwell Automation Fair at Home 2020

Automation Fair® At Home 2020

The Automation Fair At Home experience will feature the newest solutions and innovations, the opportunity to interact with technology experts and executives, participate in engaging hands-on labs, training sessions, industry-focused forums, and keynote presentations, and network with leading professionals in the field.

Details