Loading Events

« All Events

MFG 213 | Industrial Electrical Controls Fundamentals

April 13 @ 8:30 am - April 16 @ 4:30 pm EDT


Industrial Electrical Controls Fundamentals (MFG213)

Course Purpose:

This course is designed to provide knowledge and skills required to install, maintain and troubleshoot machine controls.

At the completion of this course, you will be able to:

  • Define the safety considerations that must be observed when installing, checking or locking out electrical equipment
  • Define the uses and functions of input and output devices, relays, and motors
  • Demonstrate the reading of schematic diagrams and logic
  • Define an open and short condition and perform voltage and current measurements
  • Demonstrate the proper use of the following test equipment in the lab to measure voltage, current, resistance, and continuity: VOM, DVM, Multi-meters, continuity tester and amp probe
  • Approximate secondary voltage, secondary current and primary current of a transformer when given its turns ratio, primary voltage, and secondary load
  • Identify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation
  • Approximate a transformer’s maximum primary current for 480V operation, using the nameplate information




April 13 @ 8:30 am EDT
April 16 @ 4:30 pm EDT
Event Categories:
Event Tags:
, , ,


EECO Richmond
1807 Boulevard West
Richmond, VA 23230 United States
+ Google Map


Cindy Chaplin
[gravityform id=”18″ title=”false” description=”false”]