Loading Events

« All Events

Industrial Electrical Controls Fundamentals (MFG213)

January 28, 2020 @ 8:30 am - January 31, 2020 @ 4:30 pm EST


Industrial Electrical Controls Fundamentals (MFG213)

Course Number 


Course Purpose

This course is designed to provide knowledge and skills required to install, maintain and troubleshoot machine controls.

At the completion of this course, you will be able to:

  • Define the safety considerations that must be observed when installing, checking or locking out electrical equipment
  • Define the uses and functions of input and output devices, relays, and motors
  • Demonstrate the reading of schematic diagrams and logic
  • Define an open and short condition and perform voltage and current measurements
  • Demonstrate the proper use of the following test equipment in the lab to measure voltage, current, resistance, and continuity: VOM, DVM, Multi-meters, continuity tester and amp probe
  • Approximate secondary voltage, secondary current and primary current of a transformer when given its turns ratio, primary voltage, and secondary load
  • Identify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation
  • Approximate a transformer’s maximum primary current for 480V operation, using the nameplate information


For more information or to register contact Cindy Chaplin at Cindy.Chaplin@eeco-net.com.


January 28, 2020 @ 8:30 am
January 31, 2020 @ 4:30 pm
Event Categories:
Event Tags:
, , ,


EECO Harrisonburg
1045 S High Street
Harrisonburg, VA 22801 United States
+ Google Map


Cindy Chaplin
  • This field is for validation purposes and should be left unchanged.