Loading Events

« All Events

  • This event has passed.

Industrial Electrical Controls Fundamentals (MFG213)

April 16 @ 8:30 am - April 19 @ 4:30 pm EDT


Course Number 


Course Purpose

This course is designed to provide knowledge and skills required to install, maintain and troubleshoot machine controls.

At the completion of this course, you will be able to:

  • Define the safety considerations that must be observed when installing, checking or locking out electrical equipment
  • Define the uses and functions of input and output devices, relays, and motors
  • Demonstrate the reading of schematic diagrams and logic
  • Define an open and short condition and perform voltage and current measurements
  • Demonstrate the proper use of the following test equipment in the lab to measure voltage, current, resistance, and continuity: VOM, DVM, Multi-meters, continuity tester and amp probe
  • Approximate secondary voltage, secondary current and primary current of a transformer when given its turns ratio, primary voltage, and secondary load
  • Identify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation
  • Approximate a transformer’s maximum primary current for 480V operation, using the nameplate information

Click to view course flyer


For more information or to register contact Cindy Chaplin at Cindy.Chaplin@eeco-net.com.


April 16 @ 8:30 am
April 19 @ 4:30 pm
Event Category:
Event Tags:


EECO Richmond
1807 Boulevard West
Richmond, VA 23230 United States
+ Google Map


Cindy Chaplin
  • This field is for validation purposes and should be left unchanged.