Siemens SIRIUS 3RR24422AA40 3-Phase Adjustable Digital Current Monitoring Relay w/ IO-Link Interface, 24 VDC, 4 to 40 A, 1CO Contact

Name: Siemens SIRIUS 3RR24422AA40 3-Phase Adjustable Digital Current Monitoring Relay w/ IO-Link Interface, 24 VDC, 4 to 40 A, 1CO Contact
Brand: Siemens
SKU: SIC3RR24422AA40
Availability: InStock

Short Description

The 3RR2 monitoring relays are used not only for monitoring motors or other loads, but additionally also facilitate optimum current monitoring of the entire system or driven process. This for example allows for the early detection and signaling of load shedding or motor overloads. The 3RR2 monitoring relay for current monitoring is directly integrated in the load feeder. It is simply plugged onto the contactor.

Siemens SIRIUS Current Monitoring Relay, 3-Phase Adjustable Digital, Series: 3RR24, 24 VDC, 4 to 40 A, 20 to 400 Hz Frequency, 1CO Contact Configuration, Surface Mounting, Spring Loaded Terminal, LCD Display, 0 to 999.9 s Response, IP20 Enclosure, 109 mm H x 45 mm W x 92 mm D Dimensions

MFG #: 3RR24422AA40

EECO #: SIC3RR24422AA40 SIC3RR24422AA40

Brand: Siemens

Attributes

Features

Documents

Product Information

Attributes

Voltage Rating

Terminal Type

Spring-Loaded

Response Time

0 to 999.9

Enclosure Type

IP20

Frequency Rating

20 to 400

Contact Configuration

1CO

Mounting Type

Surface

Display Type

LCD

UNSPSC

39121521

Dimensions

109 mm H x 45 mm W x 92 mm D

Type

3-Phase Adjustable Digital

Series

3RR24

Amperage Rating

4 to 40

Application

For monitoring of overshoot/undershoot current, fault current, blocking current, active current, apparent current, residential current, current asymmetry, phase failure/wire break, phase sequence, switching cycle/operating hours counter and warning/alarm threshold

Features

Direct mounting on 3RT2 contactors, i.e. no additional wiring overhead in the main circuit
Optimally matched to the technical characteristics of 3RT2 contactors, no separate current transformers required
Display of actual values and status messages
Easy determination of threshold values by means of direct reference to actually measured values under set point load
Only one device is required for motor monitoring along the entire torque curve

IDW_DOCUMENT_1f16d57dcc2a5e4f3935b594e5323b711fbf40108da49c51d17d949023b1fe19

Siemens_3UG4641_2CS20_Catalog

Siemens_3UG4641_2CS20_Manual

Please note: This product is subject to geographic restrictions and can only be sold within the Carolinas.

Planning a New System?

Streamline Your Technology Transition with Expert Support and Guidance.

Learn More